**Ubuntu 18.04 Server amd64** **For the old guide, visit [[https://wiki.adopisoft.com/doku.php?id=x64-server]]** ====== Installation ====== **Important:** The following steps require basic skills on computer OS installation. Please follow the steps and respond to prompts accordingly. Please follow the steps to build your coin operated wifi hotspot using Ubuntu Server 18.04 LTS amd64: - **[[v5.1.3_x64-server#1._command_line_installation| Command Line Installation]]** - **[[v5.1.3_x64-server#2._setup_wizard| Setup Wizard]]** - **[[v5.1.3_x64-server#3._setup_payment_portal| Setup Payment Portal]]** - **[[admin_configurations| Other Admin Settings]]** ===== 1. Command Line Installation ===== Command line installation is used when software image is not available for your board/machine. First, you need to have access to the command line of your board/machine. In this guide, we will use our customized ubuntu iso [[https://drive.google.com/file/d/1nfJesTlCMCl9nN_xsQavZcybdCsT4GDS/view?usp=share_link | Ubuntu Server 18.04.3]]. Flash the iso file to your Flash drive using rufus, unetbootin, or balena. Insert the flash drive into your PC. Access bios setting and set the boot priority to mass media or flash drive first. Read and respond to installation prompts accordingly. After the installation, it should show the login screen with the IP Address of your machine. * Connect your Machine to modem, make sure that it can connect to internet during installation. * Download the ISO file [[https://drive.google.com/file/d/1nfJesTlCMCl9nN_xsQavZcybdCsT4GDS/view?usp=share_link|Ado-5.1.3-beta2-server-amd64.iso]] and flash it to your flashdrive using rufus, unetbootin or balena etcher. * Insert your flash drive to the machine. Boot into **BIOS** setting. Press the button to enter BIOS setup. In this sample, DELETE button is the key to **BIOS** setup.
{{:pc-installation-1.png?600|}} * Go to boot setting and in the boot priority, select **mass media or the flash drive** you just inserted as option 1 and hit enter.
{{:pc-installation-2.png?600|}} * Save changes and exit
{{:pc-installation-3.png?600|}} * Select **Auto Install AdoPiSoft Hotspot System**
{{:pc-installation-4.png?600|}} * If a prompt to unmount partitions that are in use, select "**Yes**" and press enter.
{{:pc-installation-5.png?600|}} * In Partition disks prompt, select "**use entire disk**" to utilize the full storage capacity
{{:pc-installation-6.png?600|}} * Select the disk to partition
{{:pc-installation-7.png?600|}} * In the prompt "**Write changes to disk?**", select "Yes"
{{:pc-installation-8.png?600|}} * Wait for the installation to finish. After a successful installation, the machine will reboot. In the login screen, the credentials and the IP Address will be shown. You can now eject the flash drive.
{{:pc-installation-9.png?600|}} ===== 2. Setup Wizard ===== Given you have a mobile phone or another PC connected to the same network with your pc/machine, open a browser and enter your board/machine's IP address. Example: http://192.168.1.118 ==== Setup Account ==== - Type your password - Confirm your password - Click **Save Changes** button **NOTE: If you encounter error about UUID, just ignore it and proceed.** ==== Select Board ==== - Choose your board/machine type. Select **Generic x64 Machine**. - Click **Save Changes** ==== Setup WAN ==== - Select your WAN network interface. The system will automatically recommend the interface connected to your network. - Click **Set as WAN Interface** button - Configure your WAN interface (Dynamic IP or Static IP). If not sure, check **Dynamic IP Address**. - Click **Save Changes** button ==== Setup LAN ==== **Important:** Make sure your board/machine has two network interface. For boards without wifi interface, you have to insert the USB to LAN adapter first. - Choose the network interface for your LAN. It can be the wifi interface (wlan0 or wlpsxxx) or any ethernet interface. - Check **Enable Captive Portal** - Set alias to **LAN Interface** or **Built-in WiFi** //(or anything you like)// - Disable/Uncheck **Dynamic IP Address** - Set Statc IP Address to **10.0.0.1** - Set Network Prefix to **20** - Check **Use System DNS Server** - Check **Enable DHCP Server on this interface** - Set DHCP Pool Start to **10.0.0.10** - Set DHCP Pool End to **10.0.15.254** - Click **Save Changes** button - Click **Done** or **Finish** button. **IMPORTANT:** After the successful setup, update the software to latest version. Go to **System**->**Device** page and click **Check Updates**. ===== 3. Setup Payment Portal ===== === For payment portal, you can use any of the following: === * **[[serial_coinslot| Serial Coinslot]]** * **[[sub-vendo| Wireless Coinslot/Sub-vendo]]** * **[[https://drive.google.com/drive/u/2/folders/1xJsWVK2s0_7S0tZmNZyKCPMstPTtm5pX|Wired LAN Subvendo]]**