Differences

This shows you the differences between two versions of the page.

--- 4.0.0-beta:gpio_numbering [2020/03/01 10:38]
admin removed
+++ — (current)
@@ Line 1: / Line 1: @@
-This section describes the GPIO numbering for each type of board.
-For **Raspberry Pi 3 & 4** and **Orange Pi Boards**, we are using **Board Numbering System**. In board numbering system, the gpio numbers are base on the order of GPIO pins on the board.
-For other boards (generic ARM boards), the numbering system is base on **BCM**. In **BCM Numbering System**, the gpio number are those after **GPIO** keyword. For example, if the pin is named GPIO7, the pin number is **7**.
-Please refer to [[https://raspberrypi.stackexchange.com/questions/12966/what-is-the-difference-between-board-and-bcm-for-gpio-pin-numbering | this discussion]] to know the difference between board and BCM GPIO numbering system.
------
-====== Raspberry Pi 3/4 ======
-{{ :4.0.0-beta.1:rpi-gpio-guide.jpg?direct&600 |}}
-----
-====== Orange Pi One ======
-{{ :4.0.0-beta.1:orange-pi-one-gpio.jpg?direct&600 |}}
-----
-====== Orange Pi PC ======
-{{ :4.0.0-beta.1:orange-pi-pc-gpio.jpg?direct&600 |}}
-----
-====== Orange Pi Zero ======
-{{ :4.0.0-beta.1:orange-pi-zero-gpio-pins.jpg?direct&600 |}}

AdoPiSoft Wiki